Conical mill Brief Introduction:
Conical mill is the newest type of milling machines Shanghai Jianye has made. And we have also applied for patents on this product. The conical mill is a quite different mill from the traditional mills in its typical outlooks, simple structure, excellent capability and reliable performance. It is quite suitable for the construction, the metallurgy, the mining industry, the power generator, chemical industry and etc. It can be used to crush various raw materials such as cement, cement clinker, iron ore, slag, limestone, dolomite, feldspar, quartz, ophiolite, barite, fluorite, shale gypsum etc.
Conical mill Application:
It has a optimistic application prospect in the fields like the mining, metallurgy, chemical industry, building materials and other industries a variety of materials of high fine milling processing, the finished product granularity range adjustment.
Conical mill Operating Principle:
The drive is on top of machine. Motor is run by gear box, to drive the main shaft. There are 3 or 4 rollers on main shaft. They are installed in conical inside liner, and run in revolution and rotation. The material is feed from top. With its own weight and thrust, it becomes into material deck. Grinding by roller again and again, it becomes into powder. The production is released from bottom. Through bucket elevator, it takes into powder separator. After separating, the fine powder is production. The coarse powder goes back into mill to regrind. In this case, the lifetime for ring and liner is much longer, bcos they do not touch each other. Its gap can be adjusted.
Sand grinding adopts medium speed with medium pressure, continuous grinding. The material is feed from top and release from bottom. Grinding and separator is two step. Grinding liner, main mill shaft, spring , thickness of material deck can all be adjusted. Along with powder separator, it is very easy to adjust the producdtion size, and make the machine work well.
Conical mill Technical Specifications:
|
Model
|
JYM5055
|
JYM6065
|
JYM8085
|
|
capacity(t/h)
|
20-30
|
40-55
|
0-80
|
|
Feed in size(mm)
|
<30
|
<45
|
<50
|
|
Production size(mm)
|
0-5
|
0-5
|
0-5
|
|
Power(kw)
|
110
|
185
|
250
|
|
Dimension(m)
|
?3.1X4.8
|
?4.1X5.1
|
?5.1X5.5
|
Note: This specification is just reference, any changes are subject to the real Conical Mill product |
